Double Tooth Roller Crusher
Maximum feed:<800mm
Production capacity:15-5000(t/h)
Features:It is characterized by low maintenance cost, no requirement for water, reliable performance, low power consumption, less dust and low noise.
Applicable materials:Limestone, silicon metal, basalt, construction waste (concrete), quicklime, coal, coke, clay, and chemical raw materials.
Double Tooth Roller Crusher Product Description
Double-toothed roll crusher is equipped with two toothed rolls, and the toothed roll surface is divided into large (small) wolf teeth, special teeth for cutting coke, annular teeth, straight teeth, large plate teeth, etc. It is suitable for the finished product size requirement of 10-300mm, and the requirement of medium or coarse crushing occasions with fewer powders and more particles. Such as limestone, silicon metal, basalt, construction waste (concrete), quicklime, coal, coke, clay, chemical raw materials. It can be widely used in mining, thermoelectricity, metallurgy, chemical industry, building materials and other industries, and is characterized by low maintenance cost, no requirement for water, reliable performance, small power consumption, less dust, low noise and so on.
According to the user requirements are divided into triangle belt and coupling drive (hard link) two ways. This equipment can be changed to diesel engine or gasoline engine as power in case of no electricity in the mine.
Double Tooth Roller Crusher Working Principle
Double-tooth roll crusher utilizes two wear-resistant crushing rolls, which rotate relative to each other to generate high squeezing force to crush the materials. After the materials enter the gap between the two tooth rolls (V-shaped crushing chamber), they are subjected to squeezing force and shear force by the relative rotation of the two tooth rolls, and then under the squeezing, shearing and grinding, the materials are crushed into the required size and then discharged by the discharge port.
| NO |
Medel |
Feed size
(mm) |
Output size
adjustable(mm) |
Capacity
(t/h) |
Motor power
Kw |
Protection |
Transmission |
| 1 |
2PG-10CT |
<120 |
10-50 |
2-20 |
6-8 |
spring |
V belt
or
coupling |
| 2 |
2PG-30CT |
<120 |
10-50 |
6-40 |
8-15 |
| 3 |
2PG-50CT |
<200 |
10-60 |
10-80 |
22-37 |
| 4 |
2PG-60CT |
<300 |
10-80 |
20-150 |
30-45 |
| 5 |
2PG-80CT(Y) |
<400 |
10-100 |
30-200 |
60-75 |
spring
or
hydraulic |
| 6 |
2PG-100CT(Y) |
<300 |
10-90 |
40-280 |
75-90 |
| 7 |
2PG-120CT(Y) |
<400 |
10-120 |
50-350 |
90-110 |
| 8 |
2PG-150CT(Y) |
<600 |
10-150 |
65-450 |
110-150 |
| 9 |
2PG-220CT(Y) |
<800 |
10-180 |
80-600 |
150-180 |
| 10 |
2PG-350CT(Y) |
<900 |
10-200 |
90-800 |
220-280 |
| 11 |
2PG-500CT(Y) |
<1200 |
20-300 |
200-2500 |
250-320 |
| 12 |
2PG-800CT(Y) |
<1200 |
20-300 |
300-3500 |
320-400 |
| 13 |
2PG-1200CT(Y) |
<1200 |
20-300 |
400-5000 |
600-800 |
About Jiuchang
Who we are?
We are one of the top 10 manufacturers of crushing equipment and the No1 manufacturer of roller crushers in China.Our factory was established in the year 2004, has two factory addresses, an area of over 120000 square meters. We have many national patent products, we are the national class high-tech enterprise and member of China Heavy industry Association.Annual production capacity is over 1000 sets.
What we do?
We produce crushing equipment for ores, metallurgy, cement, mining, steel, thermalpower, coal, building materials, chemicals, ceramics and other similar industries.Our annual output value is over 200 milion RMB.We have been exporting to over 20 countries since 2010.
Q: What about Warranty? what will you do if the machine break down ?
A: Warranty is 12 months for main machine except for easily worn spare parts .We will provide the technical advice and find the solution immediately for you when the machine is in troubleshoot. For those wear parts, we guarantee the high quality parts for long-term supply.
Q: What should I provide you if I want to get a best quotation ?
A: If you need a suitable model and a best quotation ,please let me know
1). You need a whole line or a gingle machine?
2). What is your material and material features,hardness and moisture?
3).What is the feed size ?
4).What is the output size?
5). What is the capacity(tons/hour)you expect?
Q: What could you help me to do for the business ?
A: Many thanks for your trust , we can provide you with the preservices of design scheme for complete production lines ,spot inspection and operator traning according to your demands and the conditions of applied spot ,we can help you choose the right equipments ,drilling rig ,loader ,trucks ,excavators and so on.
){kind=link}