Double Toothed Roll Crusher Series-Double Toothed Roll Crusher for Sale

• Customization: Available
• Type: Roller Crusher
• Motor Type: AC Motor
• Model NO.: 2PG-50CT
• Application: Stone Coke Coal
• Materials: Stone Coke Coal
• Outlet Size: 200-300mm
• Inlet Size: 1000×1200mm
• Condition: New
• Warranty: 12 Months
• After-sales Service: 12 Months
• Capacity: 15-5000(T/H)
• Material: High Manganese Steel
• Shaft Material: 40 Cr Forging
• After Sale Service: Life-Long Service
• Colour: Customisable
• Protection Mode: Sprung or Hydraulically
• Transmission Method: Triangle Maybe Coupling
• Material (That Sth Is Made of): Customisable
• Roll Operation Mode: Counterpart
• Roll Size: 1200×800
• Material Hardness: Less Than 250MPa
• Applicable Materials: Limestone, Silicon Metal, Basalt, Construction Was
• Features: It Is Characterized by Low Maintenance Cost, No Re
• Applicable Industries: It Can Be Widely Used in Mining, Thermoelectricity
• Overall Dimensions: Customisable
• Transport Package: Naked Wood Case Steel Case
• Specification: 500TPH
• Trademark: Jiuchang
• Origin: Shandong China
• HS Code: 8474201000
• Production Capacity: 1000 Sets Per Year
• Package Size: 2400.00cm * 2200.00cm * 1200.00cm
• Package Gross Weight: 6500.000kg

Product Description

Double roll crusher can be widely used in mining, thermoelectricity, metallurgy, chemical industry, building materials and other industries.

Product Description

Double Tooth Roller Crusher
Maximum feed:<800mm
production capacity:15-5000(t/h)
Features:It is characterized by low maintenance cost, no requirement for water, reliable performance, low power consumption, less dust and low noise.
Applicable materials:Limestone, silicon metal, basalt, construction waste (concrete), quicklime, coal, coke, clay, and chemical raw materials.

Double Tooth Roller Crusher product description
        Double-toothed roll crusher is equipped with two toothed rolls, and the toothed roll surface is divided into large (small) wolf teeth, special teeth for cutting coke, annular teeth, straight teeth, large plate teeth, etc. It is suitable for the finished product size requirement of 10-300mm, and the requirement of medium or coarse crushing occasions with fewer powders and more particles. Such as limestone, silicon metal, basalt, construction waste (concrete), quicklime, coal, coke, clay, chemical raw materials. It can be widely used in mining, thermoelectricity, metallurgy, chemical industry, building materials and other industries, and is characterized by low maintenance cost, no requirement for water, reliable performance, small power consumption, less dust, low noise and so on.
       According to the user requirements are divided into triangle belt and coupling drive (hard link) two ways. This equipment can be changed to diesel engine or gasoline engine as power in case of no electricity in the mine.

Double Tooth Roller Crusher working principle
       Double-tooth roll crusher utilizes two wear-resistant crushing rolls, which rotate relative to each other to generate high squeezing force to crush the materials. After the materials enter the gap between the two tooth rolls (V-shaped crushing chamber), they are subjected to squeezing force and shear force by the relative rotation of the two tooth rolls, and then under the squeezing, shearing and grinding, the materials are crushed into the required size and then discharged by the discharge port.
 

Product Parameters

NO	Models	Feed Size(mm)	Discharge Size (mm) Adjustable	Capacity (T/H)	Motor Power (kw)	Protection	Transmission
1	2PG-10CT	<120	10-50	2-20	3X2	Spring	V-belt or coupler
2	2PG-30CT	<120	10-50	6-40	5.5X2
3	2PG-50CT	<200	10-60	10-80	15X2
4	2PG-60CT	<300	10-80	20-150	18.5X2
5	2PG-80CT(Y)	<400	10-100	30-200	30X2	Spring Hydraulic or Coupler
6	2PG-100CT(Y)	<300	10-90	40-280	37X2
7	2PG-120CT(Y)	<400	10-120	50-350	45X2
8	2PG-150CT(Y)	<600	10-150	65-450	55X2
9	2PG-220CT(Y)	<800	10-180	80-600	75X2
10	2PG-350CT(Y)	<900	10-200	90-800	110X2
11	2PG-500CT(Y)	<1200	20-300	200-2500	160X2
12	2PG-800CT(Y)	<1200	20-300	300-3500	200X2
13	2PG-1200CT(Y)	<1200	20-300	400-5000	370X2

 

Company Profile

Shandong Jiuchang Heavy Industry Technology Co., Ltd. is a high-tech enterprise mainly engaged in the production of various types of crushing machinery, integrating research and development, manufacturing, sales, services, and international trade. The company is located in the beautiful international kite capital of Weifang, Linqu (the location of the National AAAAA Forest Park and Yishan Scenic Area), Dongcheng Industrial Zone 6. The factory area (two factories) covers an area of nearly 200 acres, with an annual production of 1000 sets of various crushing machinery and supporting equipment. It is a well-known enterprise in the domestic crushing industry.

The company′s main products include fine crushing production lines (high fineness and large output without screening), sand production lines, stone production lines, and construction waste production lines; Intelligent energy-saving roller mill, intelligent pair roller crusher, toothed roller crusher, high-pressure roller mill, cone crusher, coke cutting machine, toothed knife type double roller shredder, solid waste shredder, high-pressure ball forming machine, and three roll crusher; Four (tooth) roll crusher, four roll three crushing crusher, single tooth roll crusher, jaw crusher, hammer crusher, impact crusher, as well as auxiliary supporting equipment such as feeder, feeder, vibrating screen, belt conveyor, and iron remover.

On the basis of absorbing advanced technology from both domestic and foreign sources, the company′s technical personnel have successfully developed intelligent energy-saving roller presses (mills), three roll crushers, four roll three crushing crushers (invention patents), six roll five crushing crushers (invention patents), and a flat opposite pole magnetic separator (invention patents) with international standards. They have more than 40 national patents.

The company has taken the lead in obtaining ISO9001 international quality management system certification and EU CE safety certification; We have successively drafted national industry standards for three roll crushers, four roll three roll crushers, and toothed double roll shredders; Has been successively rated as a high-tech enterprise and an AAA level credit unit; Shandong Famous Brand Products Weifang Roller Crusher Technology Research Center, Municipal Enterprise Technology Center, and Contract abiding and Creditworthy Enterprise; Obtaining the independent import and export rights for commodity trade in the People′s Republic of China. The company has successively joined the member units of China Sand and Stone Association and China Heavy Industry.

In 2017 and 2019, the company participated in the Weifang Science and Technology Development Plan project and won awards for two projects: "Key Technology Development of DCS Intelligent Small Roll Multi Crusher" and "Research and Development of Fine Particle Non screening Crushing Technology and Complete Equipment". Obtained the copyright of V1.0 computer software for DCS powerful crushing unit equipment control system.

The company has always adhered to the business philosophy of leading technology, excellent quality, reasonable prices, and thoughtful services. We always adhere to the principle that quality is the life of the enterprise, constantly replace new processes and equipment, ensure that each product meets high standards and quality, and establish a strict and effective quality management system to ensure that products meet customer satisfaction in every aspect of design, production, and service.
 

 

Certifications

 

Our Projects

Loading& Delivery

Customers

FAQ

Q: What about Warranty? what will you do if the machine break down ?

A: Warranty is 12 months for main machine except for easily worn spare parts  .We will provide the technical advice and find the solution immediately for you when the machine is in troubleshoot. For those wear parts, we guarantee  the high quality parts for long-term supply.

Q: What should I provide you if I want to get a best quotation ?

A: If you need a suitable model and a best quotation ,please let me know 
1). You need a whole line or a gingle machine?
2). What is your material and material features,hardness and moisture? 
3).What is the feed size ?
4).What is the output size? 
5). What is the capacity(tons/hour)you expect?

Q: What could you help me to do for the business ? 

A: Many thanks for your trust , we can provide you with the preservices of design scheme for complete production lines ,spot inspection and operator traning according to your demands and the conditions of applied spot.