Three Roller Crusher
Maximum feeding:<90mm
Production capacity:5-300(t/h)
Features:The use of low maintenance costs, large crushing ratio, reliable performance, less dust, low noise and so on.
Applicable materials:Fertilizer, coke, coal, cement clinker, ceramic raw materials, limestone, feldspar, water slag, quartzite, gypsum, clay, salt, chemical raw materials and other solid materials.
Three Roll Crusher Product Description
Three-roll crusher is suitable for fine crushing of solid materials with compressive strength less than 240Mpa and water less than 20%, such as chemical fertilizer, coke, coal, cement clinker, ceramic raw materials, limestone, feldspar, water slag, quartzite, gypsum, clay, salt, chemical raw materials and other solid materials. It is characterized by low maintenance cost, large crushing ratio, reliable performance, low dust and low noise.
Three rolls crusher is equipped with three crushing rolls, according to the crushing size required by the user, the three roll surfaces are arbitrarily selected from the combination of surfacing roll surface and flat roll surface.
Three-roll crusher is suitable for fine crushing operation with feed size less than 90mm and finished product size 0.2-10mm, such as fertilizer crushing in chemical fertilizer factory, feldspar crushing in ceramic industry, cement clinker crushing in cement factory and water slag crushing in cement factory, quartz crushing in quartz industry, iron ore crushing in iron ore mining industry, chemical crushing in chemical industry, etc.; or crushing occasions similar to those mentioned above. This equipment can be changed to diesel engine and gasoline engine as power in the case of no electricity.
Three Roll Crusher Working Principle
Three-roll crusher utilizes three high-strength wear-resistant alloy crushing rolls, which rotate relative to each other to generate high squeezing pressure to crush materials. After entering the upper two-roll crushing chamber and being squeezed by the relative rotation of the two rolls, the materials will be squeezed and ground for the first time (coarse crushing), and then the materials will immediately enter into the relatively rotating lower two-rolls (the middle rolls are common rolls), where they will be squeezed and ground for the second time by squeezing pressure of the lower two-rolls (fine crushing), and crushed into the required granularity by discharging from the discharge port.
| NO |
Model |
Feed size
(mm) |
Output size
adjustable(mm) |
Capacity
(t/h) |
Motor power
Kw |
Protection |
| 1 |
3PG-15PT |
<40 |
1-10 |
10-60 |
30-60 |
spring
or
hydraulic |
| 2 |
3PG-30PT |
<40 |
1-10 |
20-90 |
44-90 |
| 3 |
3PG-45PT |
<40 |
1-10 |
30-140 |
60-100 |
| 4 |
3PG-55PT |
<60 |
1-10 |
20-120 |
75-110 |
| 5 |
3PG-75PT |
<60 |
1-10 |
30-160 |
100-150 |
| 6 |
3PG-90PT |
<60 |
1-10 |
50-260 |
130-170 |
| 7 |
3PG-100PT |
<90 |
1-10 |
30-160 |
160-250 |
| 8 |
3PG-120PT |
<90 |
1-10 |
50-200 |
180-260 |
| 9 |
3PG-140PT |
<90 |
1-10 |
60-300 |
290-360 |
About Jiuchang
Who we are?
We are one of the top 10 manufacturers of crushing equipment and the No1 manufacturer of roller crushers in China.Our factory was established in the year 2004, has two factory addresses, an area of over 120000 square meters. We have many national patent products, we are the national class high-tech enterprise and member of China Heavy industry Association.Annual production capacity is over 1000 sets.
What we do?
We produce crushing equipment for ores, metallurgy, cement, mining, steel, thermalpower, coal, building materials, chemicals, ceramics and other similar industries.Our annual output value is over 200 milion RMB.We have been exporting to over 20 countries since 2010.
Q: What about Warranty? what will you do if the machine break down ?
A: Warranty is 12 months for main machine except for easily worn spare parts .We will provide the technical advice and find the solution immediately for you when the machine is in troubleshoot. For those wear parts, we guarantee the high quality parts for long-term supply.
Q: What should I provide you if I want to get a best quotation ?
A: If you need a suitable model and a best quotation ,please let me know
1). You need a whole line or a gingle machine?
2). What is your material and material features,hardness and moisture?
3).What is the feed size ?
4).What is the output size?
5). What is the capacity(tons/hour)you expect?
Q: What could you help me to do for the business ?
A: Many thanks for your trust , we can provide you with the preservices of design scheme for complete production lines ,spot inspection and operator traning according to your demands and the conditions of applied spot ,we can help you choose the right equipments ,drilling rig ,loader ,trucks ,excavators and so on.
){kind=link}