Product Description
Six Roller Five Stage Crusher
Maximum Feed Size:less than 90mm
Production Capacity:2-500(t/h)
Features:low maintenance cost, large crushing ratio,
reliable performance, less dust and low noise.
Suitable materials:Coke, coal, ceramic raw materials,
ores, water slag, gypsum, clay, salt, chemical raw
materials and other solid materials.
Six Roller Five Stages Crusher Product Description
Six rolls and five crusher is suitable for ultra-fine crushing of solid materials with compressive strength less than 2,400Mpa and water less than 30%, such as coke, coal, ceramic raw materials, ores, water slag, gypsum, clay, salt, chemical raw materials and other solids, with low maintenance cost, large crushing ratio, reliable performance, low dust, low noise and other characteristics.
The six roller surfaces are divided into surfaced rollers, studded alloy rollers or flat rollers, which can be selected and combined according to the user's requirements for particle size, and are suitable for ultra-fine crushing operations with a feed size of less than 90 mm and a finished product size of 0.1-5 mm. It is suitable for ultra-fine crushing operation with feed size less than 90 mm and finished product size 0.1-5mm. Such as mining industry crushing quartz stone, iron ore; ceramic industry crushing feldspar; thermal power plant crushing limestone; cement plant crushing slag; building materials plant crushing gypsum; chemical industry crushing all kinds of chemical raw materials, etc.; or similar crushing occasions with the above.
Six Roller Five Stages Crusher Working Principle
Six rollers five crushing crusher utilizes six high-strength wear-resistant alloy crushing rolls, which rotate relative to each other to produce high squeezing force and shear force to crush materials. After the material enters into the top two rolls V crushing chamber, it is squeezed by the relative rotation of the upper two rolls, and the material is squeezed and ground for the first time (coarse crushing), and then it enters into the relative rotation of the two and three rolls V crushing chamber for the second squeezing and grinding (fine crushing), and then it enters into the three and four rolls V crushing chamber for the third squeezing, and then it enters into the four and five rolls V crushing chamber for the fourth squeezing, and then it enters into the five rolls V crushing chamber for the fifth squeezing and shearing, and then it enters into the six rolls V crushing chamber for the fifth squeezing and shearing, and finally it enters into the five, After entering into the V-type crushing chamber of three or four rolls for the third squeeze, entering into the V-type crushing chamber of four or five rolls for the fourth squeeze, and finally entering into the V-type crushing chamber of five or six rolls for the fifth squeeze, shearing and grinding (ultra-fine crushing), the product will be crushed into the required granularity and discharged from the discharge.
Product Parameters
| NO |
Model |
Feed size(mm) |
Output Size
adjustable(mm) |
Capacity(t/h) |
Motor power(Kw) |
Protection |
Transmission |
| 1 |
6PGS-10PT |
<20 |
0.1-5 |
2-30 |
33-45 |
spring |
V-belt
or
coupler |
| 2 |
6PGS-30PT |
<40 |
0.1-5 |
5-60 |
52-67 |
| 3 |
6PGS-50PT |
<40 |
0.1-5 |
8-90 |
67--82 |
| 4 |
6PGS-60PT(Y) |
<60 |
0.1-5 |
12-120 |
82-100 |
spring
or
hydraulic |
| 5 |
6PGS-80PT(Y) |
<60 |
0.1-5 |
20-180 |
100-132 |
| 6 |
6PGS-100PT(Y) |
<80 |
0.1-5 |
30-220 |
132-165 |
| 7 |
6PGS-120PT(Y) |
<90 |
0.1-5 |
45-320 |
165-200 |
| 8 |
6PGS-150PT(Y) |
<90 |
0.1-5 |
55-400 |
200-250 |
| 9 |
6PGS-180PT(Y) |
<90 |
0.1-5 |
70-500 |
242-300 |
Company Profile
About Jiuchang
Who we are?
We are one of the top 10 manufacturers of crushing equipment and the No1 manufacturer of roller crushers in China.Our factory was established in the year 2004, has two factory addresses, an area of over 120000 square meters. We have many national patent products, we are the national class high-tech enterprise and member of China Heavy industry Association.Annual production capacity is over 1000 sets.
What we do?
We produce crushing equipment for ores, metallurgy, cement, mining, steel, thermalpower, coal, building materials, chemicals, ceramics and other similar industries.Our annual output value is over 200 milion RMB.We have been exporting to over 20 countries since 2010.
Certifications
Customers
Loading& Delivery
FAQ
Q: What about Warranty? what will you do if the machine break down ?
A: Warranty is 12 months for main machine except for easily worn spare parts .We will provide the technical advice and find the solution immediately for you when the machine is in troubleshoot. For those wear parts, we guarantee the high quality parts for long-term supply.
Q: What should I provide you if I want to get a best quotation ?
A: If you need a suitable model and a best quotation ,please let me know
1). You need a whole line or a gingle machine?
2). What is your material and material features,hardness and moisture?
3).What is the feed size ?
4).What is the output size?
5). What is the capacity(tons/hour)you expect?
Q: What could you help me to do for the business ?
A: Many thanks for your trust , we can provide you with the preservices of design scheme for complete production lines ,spot inspection and operator traning according to your demands and the conditions of applied spot ,we can help you choose the right equipments ,drilling rig ,loader ,trucks ,excavators and so on.
){kind=link}