Energy-Saving Roller Press (milling) Machine
Maximum Feed Size:<70mm
Production Capacity:20-500(t/h)
Features:reliable performance, large output, low power consumption and high cost performance.
Suitable materials:Pre-crushing of cement clinker, limestone and composite materials before mill in cement industry; fine crushing of iron ore before dry separation in iron ore industry. Mining industry crushing potassium sodium feldspar, quartz stone, building material.
Energy-Saving Roller Press (milling) Machine Product Description
Energy-saving roller press (mill) is a grinding equipment developed by our company by synthesizing the advantages of all roller presses in the market, which is suitable for fine crushing of hard materials with compressive strength less than 300Mpa and humidity less than 30%, and can be widely used in the industries of cement, mining, metallurgy, ceramics, etc. It has the features of reliable performance, high output, low power consumption and high cost performance. It is characterized by reliable performance, large output, low power consumption and high cost performance.
The energy-saving roller press mill is equipped with two solid grinding rollers, and the roller surface adopts resurfacing welded and hard alloy stud roller surface, which is suitable for the fine crushing operation with the feed size less than 70mm and the finished product size below 3-15mm. For example, pre-crushing cement clinker, limestone and composite materials before mill in cement industry; fine crushing of iron ore before dry separation in iron ore industry. Mining industry crushing potassium sodium feldspar, quartz stone, building materials industry crushing cobblestone sand or similar crushing occasions with the above.
Energy-Saving Roller Press (mill) Machine Working Principle
Energy-saving roller press (mill) machine is relying on the two opposite rotation of the solid roller relative to the medium-speed rotation, the use of inertial dynamics produced by the principle of high extrusion pressure (the general pressure is set to 150MPa), the material through the fabric device, into the gap between the two rollers (V-type crushing chamber), the extrusion, shear to make the material mechanism changes, completely destroyed the internal crystalline structure of the material, so that the material cake and powder, and finally from the two rollers fall in the gap, through the outlet.
| NO |
Model |
Feed size(mm) |
Output size
adjustable(mm) |
Capacity(t/h) |
Motor power(kw) |
Protection |
| 1 |
2PGJ-40 |
<30 |
3-15 |
20-60 |
60-74 |
Spring
or
hydraulic |
| 2 |
2PGJ-60 |
<30 |
3-15 |
35-90 |
110-150 |
| 3 |
2PGJ-80 |
<30 |
3-15 |
30-120 |
150-180 |
| 4 |
2PGJ-90 |
<50 |
3-15 |
50-140 |
180-220 |
| 5 |
2PGJ-110 |
<50 |
3-15 |
60-160 |
220-264 |
| 6 |
2PGJ-130 |
<50 |
3-15 |
80-260 |
264-320 |
| 7 |
2PGJ-100 |
<70 |
3-15 |
50-160 |
180-220 |
| 8 |
2PGJ-150 |
<70 |
3-15 |
80-200 |
260-320 |
| 9 |
2PGJ-180 |
<70 |
3-15 |
100-300 |
320-400 |
About Jiuchang
Who we are?
We are one of the top 10 manufacturers of crushing equipment and the No1 manufacturer of roller crushers in China.Our factory was established in the year 2004, has two factory addresses, an area of over 120000 square meters. We have many national patent products, we are the national class high-tech enterprise and member of China Heavy industry Association.Annual production capacity is over 1000 sets.
What we do?
We produce crushing equipment for ores, metallurgy, cement, mining, steel, thermalpower, coal, building materials, chemicals, ceramics and other similar industries.Our annual output value is over 200 milion RMB.We have been exporting to over 20 countries since 2010.
Q: What about Warranty? what will you do if the machine break down ?
A: Warranty is 12 months for main machine except for easily worn spare parts .We will provide the technical advice and find the solution immediately for you when the machine is in troubleshoot. For those wear parts, we guarantee the high quality parts for long-term supply.
Q: What should I provide you if I want to get a best quotation ?
A: If you need a suitable model and a best quotation ,please let me know
1). You need a whole line or a gingle machine?
2). What is your material and material features,hardness and moisture?
3).What is the feed size ?
4).What is the output size?
5). What is the capacity(tons/hour)you expect?
Q: What could you help me to do for the business ?
A: Many thanks for your trust , we can provide you with the preservices of design scheme for complete production lines ,spot inspection and operator traning according to your demands and the conditions of applied spot ,we can help you choose the right equipments ,drilling rig ,loader ,trucks ,excavators and so on.
){kind=link}