Product Description
High Pressure Roller Mill (Press) Machine
Maximum Feed Size:<60mm
Production Capacity:80-750(t/h)
Features:High output, no fear of moisture, high fineness, reliable performance and low noise.
Suitable materials:Pre-crushing clinker, limestone and composite materials before mill in cement and aluminum industry; crushing iron ore and steel slag in iron ore industry; crushing quartz stone in quartz mining industry; crushing all kinds of ores to make free-burning.
High Pressure Roller Mill (Press) Machine Product Description
High Pressure Roller Mill (Press) is a reliable solid material grinding equipment developed by our company on the basis of introducing and absorbing the advanced technology of German roller press, combining with the advantages of Humboldt and Burlicht Roller Press, which is suitable for the fine crushing and medium crushing of solid materials with the compressive strength of less than 300Mpa and the moisture of less than 30%, and it can be widely used in the industries of cement, mining, metallurgy, ceramics, etc. It is equipped with two solid crushing rollers, and the roll surface adopts the surfacing roller surface or column nail roller surface.
High-pressure roller mill (pressure) is equipped with two solid crushing rollers, the roller surface adopts pile-welded roller surface or studded roller surface, which is suitable for the fine grinding operation with the feed size less than 60mm and the finished product size below 3mm. Such as pre-crushing clinker, limestone and composite materials before mill in cement and aluminum industry; crushing iron ore and steel slag in iron ore industry; crushing quartz stone in quartz mining industry; crushing all kinds of ores to make free-burning bricks in brick-burning factory, etc.; or crushing occasions similar to the above.
High Pressure Roller Mill (Press) Machine Working Principle
The main body of high-pressure roller mill (press) machine relies on two relatively rotating solid crushing rollers, the material through the roller press fabrication device, into the relative rotation of the roller gap (V-shaped crushing chamber), using high-pressure layer crushing principle, the material after high-pressure extrusion (general pressure set to 150Mpa), completely destroy the internal crystal structure of the material, so that the material produces a large number of micro-cracks, the material mechanism changes, so that to achieve the dense material cakes and powders, and finally from the two rollers fall in the gap by the outlet discharged.
Product Parameters
| NO |
Model |
Feed size(mm) |
Output size adjustable(mm) |
Capacity(t/h) |
Motor power(Kw) |
Protection |
| 1 |
2PGY-150 |
<45 |
2-20 |
120-160 |
200×2 |
hydraulic |
| 2 |
2PGY-200 |
<45 |
2-20 |
180-240 |
370×2 |
| 3 |
2PGY-260 |
<50 |
2-20 |
270-350 |
450×2 |
| 4 |
2PGY-300 |
<60 |
2-20 |
400-510 |
630×2 |
| 5 |
2PGY-400 |
<70 |
2-20 |
500-620 |
900×2 |
| 6 |
2PGY-500 |
<70 |
2-20 |
600-750 |
1000×2 |
| 7 |
2PGY-700 |
<80 |
4-20 |
800-1000 |
1600×2 |
Company Profile
About Jiuchang
Who we are?
We are one of the top 10 manufacturers of crushing equipment and the No1 manufacturer of roller crushers in China.Our factory was established in the year 2004, has two factory addresses, an area of over 120000 square meters. We have many national patent products, we are the national class high-tech enterprise and member of China Heavy industry Association.Annual production capacity is over 1000 sets.
What we do?
We produce crushing equipment for ores, metallurgy, cement, mining, steel, thermalpower, coal, building materials, chemicals, ceramics and other similar industries.Our annual output value is over 200 milion RMB.We have been exporting to over 20 countries since 2010.
Certifications
Customers
Loading& Delivery
FAQ
Q: What about Warranty? what will you do if the machine break down ?
A: Warranty is 12 months for main machine except for easily worn spare parts .We will provide the technical advice and find the solution immediately for you when the machine is in troubleshoot. For those wear parts, we guarantee the high quality parts for long-term supply.
Q: What should I provide you if I want to get a best quotation ?
A: If you need a suitable model and a best quotation ,please let me know
1). You need a whole line or a gingle machine?
2). What is your material and material features,hardness and moisture?
3).What is the feed size ?
4).What is the output size?
5). What is the capacity(tons/hour)you expect?
Q: What could you help me to do for the business ?
A: Many thanks for your trust , we can provide you with the preservices of design scheme for complete production lines ,spot inspection and operator traning according to your demands and the conditions of applied spot ,we can help you choose the right equipments ,drilling rig ,loader ,trucks ,excavators and so on.
){kind=link}