Product Description
Double Stages Reversible Crusher
Maximum Feed Size:<200mm
Production Capacity:5-280t/h
Features:high rate of finished products,
high powder output rate and large crushing ratio.
Suitable materials:Iron ore, river pebbles, coal
gangue, coal, fertilizer, chemical raw materials
and other materials.
Double Stages Reversible Crusher Product Description
Double-stage reversible crusher is mainly used for the fine crushing of solid materials with high humidity, which solves the fatal weakness of traditional hammer crusher that is easy to be blocked when crushing raw materials with high moisture. Designed to remove the sieve plate (sieve bar), the use of upper and lower two-stage double rotor structure, the back of the double crushing, the formation of the cavity hammer to hit the material, the material to hit the material, the first level of the first material will be crushed by the initial blow (coarse crushing), the second level of the second blow again crushing (fine crushing), the work of the material does not stain, do not clog the material, the hammerhead using carbide and manganese chrome mosaic casting technology, and the use of reversible work wear cycle is the ordinary high-chromium hammerhead of the 2-4 times; by the heavy flywheel, the heavy-duty flywheel to crush raw materials with high moisture, it is very easy to plug the material weaknesses. 4 times; rely on heavy-duty flywheel high-speed rotation inertia to do work, so the operation of low power consumption. It has the features of high yield rate (about 90% according to the characteristics of various materials), high powder rate, large crushing ratio and low operation cost.
Double Stages Reversible Crusher Working Principle
It is suitable for fine crushing of solid materials with compressive strength less than 150Mpa and water less than 25%, such as pre-crushing of various materials before ball mill; crushing of shale and coal gangue in brick factory; crushing of various grades of iron ore in iron ore industry; crushing of coal gangue for backfilling in coal mining industry; and processing of raw materials in the no-burning brick industry for the production of porous bricks, large holes and thin-walled bricks, and sintered blocks and other industries.
Product Parameters
| Model |
Feed size(mm) |
Output Size(mm) |
Capacity(t/h) |
Humidity |
Motor power(kw) |
Machine Size(mm) |
| 2PC2000×1600 |
≤200 |
adjustable
Finished 3mm Mix:
Below 2mm accounts for about 90%, of which the fine powder below 0.5mm (35 mesh) accounts for about 50%. |
240-280 |
<25% |
355+355 |
6410×3420×4260 |
| 2PC1600×1400 |
≤180 |
120-180 |
220+220 |
6000×3100×3900 |
| 2PC1400×1200 |
≤150 |
100-120 |
132+160 |
5800×2660×3210 |
| 2PC1200×1000 |
≤130 |
80-100 |
110+132 |
4090×2230×2550 |
| 2PC1000×800 |
≤100 |
60-80 |
75+75 |
3950×1750×2280 |
| 2PC800×700 |
≤100 |
40-60 |
55+55 |
3490×1400×2250 |
| 2PC600×600 |
≤100 |
20-40 |
22+22 |
2880×1300×1650 |
| 2PC600×400 |
≤100 |
15-25 |
18.5+18.5 |
2350×930×1630 |
Company Profile
About Jiuchang
Who we are?
We are one of the top 10 manufacturers of crushing equipment and the No1 manufacturer of roller crushers in China.Our factory was established in the year 2004, has two factory addresses, an area of over 120000 square meters. We have many national patent products, we are the national class high-tech enterprise and member of China Heavy industry Association.Annual production capacity is over 1000 sets.
What we do?
We produce crushing equipment for ores, metallurgy, cement, mining, steel, thermalpower, coal, building materials, chemicals, ceramics and other similar industries.Our annual output value is over 200 milion RMB.We have been exporting to over 20 countries since 2010.
Certifications
Customers
Loading& Delivery
FAQ
Q: What about Warranty? what will you do if the machine break down ?
A: Warranty is 12 months for main machine except for easily worn spare parts .We will provide the technical advice and find the solution immediately for you when the machine is in troubleshoot. For those wear parts, we guarantee the high quality parts for long-term supply.
Q: What should I provide you if I want to get a best quotation ?
A: If you need a suitable model and a best quotation ,please let me know
1). You need a whole line or a gingle machine?
2). What is your material and material features,hardness and moisture?
3).What is the feed size ?
4).What is the output size?
5). What is the capacity(tons/hour)you expect?
Q: What could you help me to do for the business ?
A: Many thanks for your trust , we can provide you with the preservices of design scheme for complete production lines ,spot inspection and operator traning according to your demands and the conditions of applied spot ,we can help you choose the right equipments ,drilling rig ,loader ,trucks ,excavators and so on.
){kind=link}