Product Description
Stone (Aggregate) Production Line
Maximum Feed Size:<800mm
Production Capacity:30-2000(t/h)
Features:It has characterics of good grain shape,
high yield, no fear of high moisture, low running
cost, large output and high degree of automation.
Applicable materials:It is suitable for crushing all
kinds of solid materials whose compressive
strength does not exceed 300Mpa, such as
limestone, river pebbles, granite, basalt, quartzite,
potassium feldspar and so on.
Stone (Aggregate) Production Line Product Description
I. Program I
When the silica content in the stone is less than 25%, the following scheme can be recommended:
Stone (aggregate) production line is composed of raw material silo, vibrating (screening) feeder, jaw crusher, impact crusher, vibrating screen, belt conveyor, electric control system and other equipment. It has the features of good aggregate particle shape (square), no fear of high moisture, low operation cost, high output, high automation degree, etc. It meets the requirements of each aggregate industry, especially suitable for the construction of highways and high-speed railroads. It is the stone (aggregate) production line with high cost performance, small investment and low running cost in the domestic market.
5mm; 5-12mm; 12-31.5mm finished stone is sent away by belt conveyor, and above 31.5mm stone is returned to impact crusher for crushing again, forming a closed loop.
According to the customer such as the requirement of 5-12mm rice stone, it can be sent by the belt machine through the fabricator to the roller sand making machine to produce mechanism sand, and then sent to the sand washing machine to clean the soil, and finally sent to the dewatering screen to dewater, and at the same time, the fine sand will be recycled up.
When the processing capacity of stone (aggregate) exceeds 200t/h; it is recommended to add another one (two) impact crusher in parallel to complete.
Second, program two
When the silica content in the stone is higher than 25%, the following scheme can be recommended:
The stone (aggregate) production line is composed of raw material silo, vibrating (screening) feeder, jaw crusher, cone crusher, vibrating screen, belt conveyor, electric control system and other equipment. It is characterized by low running cost, large output and high degree of automation. It is a stone (aggregate) production line with high capacity and low operation cost in the domestic market today.
Process flow: stone (aggregate) production line work, in accordance with the sequential order to open the electronic control system, start all the equipment, the large stone by the loader into the silo, by the vibrating feeder uniformly into the jaw crusher for coarse crushing, coarse crushed pieces of material through the transit silo by the belt conveyor to the cone crusher crusher again, the crushed pieces of material by the belt conveyor to the vibrating screen screening, screening out different specifications of the stone. The finished materials of 0-5mm, 5-12mm and 12-31.5mm are sent away by the belt conveyor, and the materials above 31.5mm are returned to the cone crusher for crushing again, forming a closed loop.
According to the customer such as the requirement of 5-12mm rice stone can be sent to the roller sand making machine by the belt machine to produce mechanism sand, and then sent to the sand washing machine to clean the soil, and finally sent to the dewatering screen for dewatering, and at the same time, the fine sand will be recycled out.
When the processing capacity of stone (aggregate) exceeds 300t/h; it is recommended to add another (two) cone crushers in series to complete.
Third, program three
When the stone is flaky in the material, the silica content is lower than 35%, and the granularity is required to be square, the following scheme can be recommended:
Stone (aggregate) production line is composed of raw material bin, vibrating (screening) feeder, jaw crusher, synchronized toothed roll crusher, vibrating screen, belt conveyor, electric control system and other equipment. It is characterized by good grain shape, no fear of high moisture, low operation cost, large output and high degree of automation. It is a stone (aggregate) production line with good grain shape, high capacity, no fear of moisture, reliable performance, convenient operation and low operating cost in the domestic market today.
Process flow: stone (aggregate) production line work, in accordance with the sequential order to open the electronic control system, start all the equipment, large stone by the loader into the silo, by the vibrating feeder evenly into the jaw crusher for coarse crushing, coarse crushed pieces of material by the belt conveyor through the fabricator to the roll crusher crusher again, the crushed pieces of material by the belt conveyor to the vibrating screen for screening, screening different specifications of the stone material. The finished materials of 0-5mm, 5-12mm and 12-31.5mm are sent away by the belt conveyor, and the materials above 31.5mm are returned to the roll crusher to be crushed again, forming a closed loop.
According to the customer such as the requirement of 5-12mm rice stone can be sent to the roller sand making machine by the belt conveyor to make sand, and then sent to the sand washing machine to wash the soil and water, and finally sent to the dewatering screen to dewater, and at the same time, the fine sand will be recycled up.
When the handling capacity of stone (aggregate) is more than 300t/h; it is recommended to add another one (two) roll crusher in parallel to complete.
Fourth, special tips
1, the processing capacity of stone (aggregate) production line can be designed according to customer requirements, configured with different models of equipment, the production of standard aggregate (12-31.5mm), a single production line can be designed 30-2000t/h to meet the needs of different customers.
2, the above three options of this stone (aggregate) production line process design, equipment configuration, according to the customer's production requirements and our proposal to determine, our company provides pre-sale, sale, after-sales service, fully for the customer to do a reasonable, economical stone (aggregate) production line.
3, stone production line according to customer requirements, the configuration of the dust collector, that is, in each stage of the crusher inlet and outlet; vibrating screen inlet and outlet are added to the dust collection port; the use of dust collector fan high negative pressure will be adsorbed in the fine particles in the bag, and regular automatic vibration to clean up the bag, the dust will be collected, to meet the national environmental standards.
Company Profile
About Jiuchang
Who we are?
We are one of the top 10 manufacturers of crushing equipment and the No1 manufacturer of roller crushers in China.Our factory was established in the year 2004, has two factory addresses, an area of over 120000 square meters. We have many national patent products, we are the national class high-tech enterprise and member of China Heavy industry Association.Annual production capacity is over 1000 sets.
What we do?
We produce crushing equipment for ores, metallurgy, cement, mining, steel, thermalpower, coal, building materials, chemicals, ceramics and other similar industries.Our annual output value is over 200 milion RMB.We have been exporting to over 20 countries since 2010.
Certifications
Customers
Loading& Delivery
FAQ
Q: What about Warranty? what will you do if the machine break down ?
A: Warranty is 12 months for main machine except for easily worn spare parts .We will provide the technical advice and find the solution immediately for you when the machine is in troubleshoot. For those wear parts, we guarantee the high quality parts for long-term supply.
Q: What should I provide you if I want to get a best quotation ?
A: If you need a suitable model and a best quotation ,please let me know
1). You need a whole line or a gingle machine?
2). What is your material and material features,hardness and moisture?
3).What is the feed size ?
4).What is the output size?
5). What is the capacity(tons/hour)you expect?
Q: What could you help me to do for the business ?
A: Many thanks for your trust , we can provide you with the preservices of design scheme for complete production lines ,spot inspection and operator traning according to your demands and the conditions of applied spot ,we can help you choose the right equipments ,drilling rig ,loader ,trucks ,excavators and so on.
){kind=link}