Product Description
Four Toothed Roller Crusher
Maximum feed:<400mm
Production capacity:15-1000(t/h)
Features:The use of low maintenance costs, large crushing ratio, reliable performance, less dust, low noise and so on.
Applicable materials:Suitable for compressive strength less than 240Mpa, water less than 30% of the solid materials, and the requirements of the finished product less powder, more particles of fine and medium crushing operations. Such as coal, coke, fertilizer raw materials
Four Toothed Roller Crusher Product Description
Four-tooth roll crusher is suitable for compressive strength less than 240Mpa, water less than 30% of the solid materials, and requires the finished product less powder, more particles of fine and medium crushing operations. Such as coal, coke, fertilizer raw materials, petroleum coke, glass pipe, chemical raw materials and other solid materials. It is characterized by low maintenance cost, large crushing ratio, reliable performance, low dust and low noise.
Four-toothed roll crusher is equipped with four crushing rolls, the upper two rolls are toothed roll surface, the lower two rolls are surfacing roll surface (flat roll surface or straight teeth optional), suitable for feeding size less than 400mm, the finished product size requirements of 8-30mm medium and fine crushing operations. Such as thermal power plant sulfide bed boiler, ordinary boiler crushing coal; fertilizer plant crushing fertilizer raw materials; copper industry crushing frozen ore powder; solar industry crushing waste glass tube, etc.; or with the above similar crushing occasions.
Four Toothed Roller Crusher Working Principle
The four-tooth roll crusher utilizes four high-strength wear-resistant crushing rolls, which rotate relative to each other to produce high squeezing and shearing force to crush materials. After the material enters the gap between the upper two rolls (V-shaped crushing chamber), it will be squeezed and sheared by the relative rotation of the two rolls, and the material will be squeezed and sheared for the first time (coarse crushing), and then it will enter into the relative rotation of the lower two rolls, and then squeezed, sheared, and ground by the lower two rolls (fine crushing) into the required granularity from the outlet.
Product Parameters
| NO |
Model |
Feed size
(mm) |
Output size
adjustable(mm) |
Capacity
(t/h) |
Motor power
Kw |
Protection |
Transmission |
| 1 |
4PG-40CT |
<120 |
2-20 |
6-50 |
26-37 |
spring |
V belt
or
coupling
|
| 2 |
4PG-50CT |
<200 |
2-20 |
8-90 |
37-75 |
| 3 |
4PG-60CT |
<200 |
2-30 |
15-130 |
60-90 |
| 4 |
4PG-80CT(Y) |
<200 |
2-30 |
20-250 |
75-110 |
Spring
or
Hydraulic
|
| 5 |
4PG-100CT(Y) |
<200 |
2-30 |
30-380 |
90-160 |
| 6 |
4PG-120CT(Y) |
<500 |
2-30 |
40-480 |
110-190 |
| 7 |
4PG-150CT(Y) |
<700 |
2-30 |
65-640 |
150-220 |
| 8 |
4PG-220CT(Y) |
<700 |
2-30 |
80-800 |
190-250 |
| 9 |
4PG-350CT(Y) |
<700 |
2-30 |
100-1000 |
220-300 |
About Jiuchang
Who we are?
We are one of the top 10 manufacturers of crushing equipment and the No1 manufacturer of roller crushers in China.Our factory was established in the year 2004, has two factory addresses, an area of over 120000 square meters. We have many national patent products, we are the national class high-tech enterprise and member of China Heavy industry Association.Annual production capacity is over 1000 sets.
What we do?
We produce crushing equipment for ores, metallurgy, cement, mining, steel, thermalpower, coal, building materials, chemicals, ceramics and other similar industries.Our annual output value is over 200 milion RMB.We have been exporting to over 20 countries since 2010.
Certifications
Customers
Loading& Delivery
FAQ
Q: What about Warranty? what will you do if the machine break down ?
A: Warranty is 12 months for main machine except for easily worn spare parts .We will provide the technical advice and find the solution immediately for you when the machine is in troubleshoot. For those wear parts, we guarantee the high quality parts for long-term supply.
Q: What should I provide you if I want to get a best quotation ?
A: If you need a suitable model and a best quotation ,please let me know
1). You need a whole line or a gingle machine?
2). What is your material and material features,hardness and moisture?
3).What is the feed size ?
4).What is the output size?
5). What is the capacity(tons/hour)you expect?
Q: What could you help me to do for the business ?
A: Many thanks for your trust , we can provide you with the preservices of design scheme for complete production lines ,spot inspection and operator traning according to your demands and the conditions of applied spot ,we can help you choose the right equipments ,drilling rig ,loader ,trucks ,excavators and so on.
){kind=link}