3PG Series Triple Roller Crusher With Large Capacity
Triple Roller Crusher for Mining
Introduction
Triple rollers crusher is the patented product of our company (ZL 2010 2 0529725.7).
It is suitable for the solid materials whose compression strength <300Mpa and humidity < 30% to proceed fine crushing
Such as fertilizer, coke, coal, cement clinker, ceramics material, lime stone, feldspar, grain slag, quartz stone, gypsum, clay, salt, chemical material and the similar solid material as above
With three crushing rollers, the roller surface can be selected welding, carbide stud, smooth, or any 2 of them
Low cost to use and maintenance, higher crushing ratio, high reliability, little dust, low noise
Working Principle
Triple rollers crusher has three strength wear-resistant alloy rollers. Materials enter into the crushing cavity on the top of two rollers and get the pressure from counter rotating of the two rollers (rough crushing), after being extruded and grinded by the two upper rollers, then the materials was crushed into the required size and sent out by belt conveyor
Technical Parameters
| NO |
Model |
Feed Size(mm) |
Output Size(mm)
Adjustable |
Capacity(t/h) |
Motor Power(kw) |
Protection |
| 1 |
3PGJ-40 |
<40 |
1-10 |
10-60 |
30x2 |
Spring or Hydraulic |
| 2 |
3PGJ-60 |
<40 |
1-10 |
20-90 |
55x2 |
| 3 |
3PGJ-90 |
<40 |
1-10 |
30-140 |
90x2 |
| 4 |
3PGJ-80 |
<60 |
1-10 |
20-120 |
75x2 |
| 5 |
3PGJ-110 |
<60 |
1-10 |
30-160 |
110x2 |
| 6 |
3PGJ-130 |
<60 |
1-10 |
50-260 |
132x2 |
| 7 |
3PGJ-100 |
<90 |
1-10 |
30-160 |
90x2 |
| 8 |
3PGJ-150 |
<90 |
1-10 |
50-200 |
132x2 |
| 9 |
3PGJ-180 |
<90 |
1-10 |
60-300 |
160x2 |
Factory Show
Certificates
Projects
Delivery
![]()
Customers
![]()
){kind=link}
){kind=link}