Grinding Machine Triple Roller Crusher For Sand Making
1. Introduction
Triple rollers crusher is the patented product of our company(ZL 2010 2 0529725.7).It is suitable for the solid materials that compression strength less than 240Mpa and moisture less than 15% to proceed fine crushing. Such as fertilizers, coke, coal, cement clinker, ceramic materials, limestone, feldspar, slag, quartz, gypsum , clay, salt, chemicals and other solid materials as above.
According to the discharge requirement of customer,the roller surface can be chosen from the combinations of flat,overlay or both of them.
Reliable performance, low maintenance ratio, high crushing ratio, low dust, low noise.
2. Working Principle
Three-roller crusher has three high-strength wear-resistant alloy grinding rollers. The materials was crushed by the high pressure which produced by the three rollers counter rotating,the materias enter into the crushing cavity on the top ot two rollers and get the pressure from counter rotating of the two rollers(rough crushing),after being extruded and grinded by the two upper rollers,the materials was produceed the second extruding and grinding (fine crushing)by the two below rollers(intermediate roll is the shared roller with the top one),then the materials was crushed into the required size and sent out by belt conveyor.
3.Technical Parameter
Factory Show
Certificates
Projects
Delivery
![]()
Customers
![]()
){kind=link}
){kind=link}